Cheap and easy upgrades
08-28-2018, 02:56 PM
Senior User
Thread Starter
Join Date: Jun 2017
Posts: 448
Likes: 0
Cheap and easy upgrades
I cut down my valance with an angle grinder today and I added a set of raptor style grille lights that I picked up on eBay. Very happy with the results and the total cost was $8.30.
08-28-2018, 02:57 PM
Join Date: Mar 2018
Location: Denver, CO
Posts: 184
Likes: 0
Received 0 Likes
on
0 Posts
Looks so much better cut like that.
08-28-2018, 03:00 PM
Senior User
Thread Starter
Join Date: Jun 2017
Posts: 448
Likes: 0
Quote:
Originally Posted by
bitNine
Looks so much better cut like that.
Thanks! It was super easy, I just made my line with masking tape, cut it with an angle grinder and cleaned up the cut with an orbital sander. Took less than 30 minutes start to finish.
08-28-2018, 04:53 PM
Join Date: Jul 2018
Location: ANchorage
Posts: 92
Looks good. Cut mine down with a band saw . Looks so much bette rtoo.
08-28-2018, 06:25 PM
Join Date: Apr 2018
Location: AZ
Posts: 351
Likes: 0
Ironic, I am planning to do this myself this weekend too
08-28-2018, 06:44 PM
Join Date: Sep 2012
Location: Laramie, WY
Posts: 3,013
I cut mine down with an X-Acto knife...bet the angle grinder was easier. I made my raptor style lights myself.
08-28-2018, 06:51 PM
Senior User
Thread Starter
Join Date: Jun 2017
Posts: 448
Likes: 0
Quote:
Originally Posted by
Turbo Dog
I cut mine down with an X-Acto knife...bet the angle grinder was easier. I made my raptor style lights myself.
Yeah I actually used some of the left over plastic I cut off of the valance to mount my raptor lights in.
08-29-2018, 06:19 PM
Join Date: Jun 2003
Location: SW VA
Posts: 10,878
08-29-2018, 06:31 PM
Join Date: Sep 2012
Location: Laramie, WY
Posts: 3,013
Quote:
Originally Posted by
Blue6.2
Yeah I actually used some of the left over plastic I cut off of the valance to mount my raptor lights in.
Great idea...I had some extra aluminum flat stock laying around.
08-29-2018, 07:32 PM
Senior User
Thread Starter
Join Date: Jun 2017
Posts: 448
Likes: 0
Quote:
Originally Posted by
ATC Crazy
That is a great thread! Thanks for sharing!
08-29-2018, 07:45 PM
Join Date: Apr 2017
Location: Western MA
Posts: 1,659
Likes: 0
So we got a new F250 at work today and it’s an XL with just a few options. Ugh it seems so ugly in its native form! Lol that front valance without a level and the tiny tires almost touched the ground! *♂️
08-29-2018, 08:08 PM
Join Date: Aug 2018
Posts: 193
Great idea! I bought one for a 4X2 that is factory shorter. This would have been just as good and maybe a little shorter yet.
08-29-2018, 08:13 PM
Senior User
Thread Starter
Join Date: Jun 2017
Posts: 448
Likes: 0
Quote:
Originally Posted by
Wmchris
Great idea! I bought one for a 4X2 that is factory shorter. This would have been just as good and maybe a little shorter yet.
I did cut mine down shorter than the 2wd version.
08-29-2018, 08:43 PM
Join Date: Aug 2018
Posts: 193
Quote:
Originally Posted by
Blue6.2
I did cut mine down shorter than the 2wd version.
I may do that yet. I assume you had to remove the supports off the frame as I did?
08-29-2018, 08:57 PM
Join Date: Jun 2018
Posts: 67
Likes: 0
Received 0 Likes
on
0 Posts
I used the large valance to add extra lights. Will probably add some additional fogs to it as I did with my 350.