Hi guys, I have a strange request: I'm looking for dentside owners to post pictures of where their flooring (vinyl or carpet) meets the kick panel.

I'm in the process of putting a new vinyl floor into my truck, and need to trim the vinyl correctly. My truck is one of those that (I think) just has bare steel for a kick panel - no trim pieces or attachments. (There is plastic vent a bit further up though.) I want to make sure I trim the vinyl correctly, but it seems odd that the vinyl floor edges wouldn't have some sort of trim piece that holds it down against the kick panel.

Seeing as I don't have anything to compare this to, I was hoping a few denstide owners would be willing to show how the carpet/vinyl floors are finished in their trucks. Thanks!

 

Here is the way it is on my 76 parts truck....nothing fancy.

 

Thanks very much! I guess there isn't any kick panel trim after all.

 

But to slick it up and or give it an edge, what about that black thin door edge guard trim that sticks on? Use that to trim out the cut edge?

https://shop.advanceautoparts.com/p/...203/11405059-P

https://www.autotrucktoys.com/p/cowles-door-edge-guards/?psid=18681&gclid=EAIaIQobChMIi9-E56zm2wIVhSJpCh02SgSsEAQYBCABEgLmCfD_BwE

https://www.walmart.com/ip/Auto-Drive-Black-Door-Trim-18-ft-Roll/36065978?wmlspartner=wlpa&adid=2222222222702576214 3&wl0=&wl1=g&wl2=c&wl3=59232459768&wl4=pla-84272567328&wl5=9023739&wl6=&wl7=&wl8=&wl9=pla&wl1 0=8175035&wl11=online&wl12=36065978&wl13=&veh=sem