1988 F350 Project
#66
*Update: Tinted the windows*
Tinted the windows all myself, 35% tint with about an 8" brow up front that tapers to 11-12" on the sides.
Added a decal from OldBodyStyleFords on Instagram, and swapped on a set or Cooper Discover AT3 tires in the rear, after I had a blowout.
Grabbed a pic of my son, Miles in the seat with one of my hats
#67
#68
Had to replace the Power Steering Belt the other day, about 11 months out of the previous generic belt.
Replaced with a Gates Green Steipwd Gatorback.
Cleaned up the White Buffalo, need to straighten that bumper put badly though.
Reinstalled the tonneau cover on the truck. Looking into doing a set of exhaust stacks and ring kit to allow both to be used.
Cleaned the inside of the truck, seriously contemplating a woodgrain set of arm rests, etc to accent the Saddle color
Replaced with a Gates Green Steipwd Gatorback.
Cleaned up the White Buffalo, need to straighten that bumper put badly though.
Reinstalled the tonneau cover on the truck. Looking into doing a set of exhaust stacks and ring kit to allow both to be used.
Cleaned the inside of the truck, seriously contemplating a woodgrain set of arm rests, etc to accent the Saddle color
#71
Join Date: Mar 2005
Location: Marlboro Mental Hospital.
Posts: 60,946
Received 3,090 Likes
on
2,154 Posts
#73
I love Nehi Peach in the glass bottle.
#75
Found a Delta toolbox for $50. Definitely missing my rails, but needed dry storage on the truck. Still debating on sliding the toolbox back 8" and mounting my exhaust stack or do a normal exhaust out to the back.
Started cleaning it up
Almost finished patching the bed floor
Floor patch completely riveted in. I purposefully didn't use silicone, etc so that when i wash my truck I can wash away the dirt and crud.
Made a strap from some scrap metal I had to hold my propane torch tanks vertically.