Hi , need a little help on my 1993 full size bronco. I had a noise in the driver side door panel so I pulled it off and the door lock actuator was just swinging free. I snapped it back into the bracket that holds it to the door and put the panel back on. I closed the door and now the door will not open from the outside handle or the inside handle. The lock was working with the key outside and the switch inside before i snapped the actuator back in place, but now I can't even open the door. My question is how do I open the door now? I tried pulling the **** up to unlock but it will not come up far enough to open the lock. any ideas ? bill