Cover for E-100 bed
#1
#2
Don't think anyone makes a cover for em' hardest part to getting any others that may match up is the rounded rear corners.
I scratchbuilt mine (soft) using 1 inch square tubing hinged at the front with pto pins. Stretched vinyl over top with snaps on the inside. & velcro on tailgate it sits flush down in the opening and is not by any means water tight,( truck seldom sees the rain) . I just wanted to hide the well used box floor and hide lawn chairs, cooler, spare and other stuff I take to shows. (I have also slept under it on multi day outings).
Others have scratchbuilt hard ones using van roof panels. I believe you'll find postings about these ones on either the econos-r-us or oldeconolines yahoo groups.
'fraid it's not a very good pic.of mine.
Mikie
near ottawa canada
64 econo p/u & 58 mercury 100 panel
I scratchbuilt mine (soft) using 1 inch square tubing hinged at the front with pto pins. Stretched vinyl over top with snaps on the inside. & velcro on tailgate it sits flush down in the opening and is not by any means water tight,( truck seldom sees the rain) . I just wanted to hide the well used box floor and hide lawn chairs, cooler, spare and other stuff I take to shows. (I have also slept under it on multi day outings).
Others have scratchbuilt hard ones using van roof panels. I believe you'll find postings about these ones on either the econos-r-us or oldeconolines yahoo groups.
'fraid it's not a very good pic.of mine.
Mikie
near ottawa canada
64 econo p/u & 58 mercury 100 panel
The following users liked this post:
Thread
Thread Starter
Forum
Replies
Last Post
BigBlueMacDaddy
Bed Covers, Tonneau covers, Toppers/Canopies & Bed liners
9
09-13-2013 06:19 AM