When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hello. I am looking for the trim clips that hold the aluminum moulding to the bedside/fender around the wheel arches. Does anyone know where to get the clips, or the part numbers for the clips? I need the part that attaches to the trim itself and the barrel that presses into the body of the truck.
I am looking for the trim clips that hold the aluminum moulding to the bedside/fender around the wheel arches. Does anyone know where to get the clips, or the part numbers for the clips? I need the part that attaches to the trim itself and the barrel that presses into the body of the truck.
Pic: Is this the type of wheel opening moulding your truck has?
Notice this type of moulding fits into the opening itself.
If this is the type of moulding your truck has, according to clip ID code (circled AM), 14 of these clips were required per side. 7 for the front, 7 for the rear.
Thank you sir! I definitely need those nuts that go into the bed which is the part number you just gave me. Any ideas on the clip that is attached to the trim that goes into that nut that is shown in the picture? 3 of those broke on me.
Hi Bill, that would be the letter JU. My truck uses seven clips in the front and six on the back. Do you know where I can get those parts?
Thanks so much,
Walter
Yes Sir, Green Sales Company looked that part# up for me and it was the nut what goes into the body and not the clip. They could not help me with the part# for the clip either.
Yes Sir, Green Sales Company looked that part# up for me and it was the nut what goes into the body and not the clip. They could not help me with the part# for the clip either.
Here's the parts catalog reference for JU .. There's no pic, so I haven't a clue what it looks like.
When purchased from Ford, the mouldings came with the clips. Number in paranthesis is the quantity I found NOS
EOTZ-16003-A Right (2) / EOTZ-16004-A Left (1) .. Front Fender Front (above the wheel opening) Bright Mouldings: 1980/86 F100/350 & Bronco / Obsolete
EOTZ-9929038-A Right (1) & EOTZ-9929039-A Left .. Quarter Panel Center Lower (above the wheel opening) Bright Mouldings: 1980/86 F100/350 & Bronco / Obsolete
Thanks for the information and your help. I would considder bying EOTZ-16003-A Right (2) / EOTZ-16004-A Left (1) but I cant find anybody selling those moldings (including the clips) as well.
KAMA OBSOLETE PARTS in East Bethel MN has 1 = 763-434-0123.
MUSTANG SERVICE CENTER in North Hollywood CA has 1 = 818-765-9266.
------------------------------------------------------------------------------------ EOTZ-16004-A .. Left Front Moulding / Obsolete
VINTAGE PARTS INC. in Beaver Dam WI has 1 = 877-846-8243.
02-27-2018, 01:16 PM
f:0