3 Point Seat Belts
#4
#7
Have a look @ this thread, Charlie lays it out pretty well!
https://www.slick60s.com/viewtopic.php?f=5&t=10557
**The only thing I can add, is Charlie mentions deburring the backside of the panel after drilling the hole. Yes, a dremel will work if you have one, but if you don't have a NOGA tool, (or an equivalent from another mfgr) you don't know what you're missing!! See below!!
https://www.noga.com/Products/deb/Deburring%20System
https://www.slick60s.com/viewtopic.php?f=5&t=10557
**The only thing I can add, is Charlie mentions deburring the backside of the panel after drilling the hole. Yes, a dremel will work if you have one, but if you don't have a NOGA tool, (or an equivalent from another mfgr) you don't know what you're missing!! See below!!
https://www.noga.com/Products/deb/Deburring%20System
Thread
Thread Starter
Forum
Replies
Last Post
wcs69rat
1961 - 1966 F-100 & Larger F-Series Trucks
3
07-17-2019 01:14 AM