When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
What do you have to remove to remove the PCV tube from the intake?
What do you have to remove to remove the PCV tube from the intake? I have felt around back there but I can't find it. Any help would be greatly appreciated.
What do you have to remove to remove the PCV tube from the intake? I have felt around back there but I can't find it. Any help would be greatly appreciated.
1999 f150 5.4 4x4 auto
If it's like mine, it's a one-piece hose/fitting assembly. It's not a mechanical fitting. The larger rubber end is usually seems a bit stuck to the intake from heat. I use a wide-bladed screwdriver and my fingers and gently work around the edges of the fitting to pry/ease it off.
--
Rick
If it's like mine, it's a one-piece hose/fitting assembly. It's not a mechanical fitting. The larger rubber end is usually seems a bit stuck to the intake from heat. I use a wide-bladed screwdriver and my fingers and gently work around the edges of the fitting to pry/ease it off.
--
Rick
Thanks Rick, I am just having a hard time finding it. I was wondering if the throttle body needed to be removed
The TB does not need to be removed. Both ends, the PCV and the TB are just tight rubber connections. The large end of hose goes over outlet on back of TB.