Looking for head studs anyone help me with part numbers please. Im doing it myseld cause its cheaper then 5k i have 235k miles on motor missfire on cylinder 2 and 3 and 7

 

I don't have the part numbers for the bolts you asked for but have you gone through the normal misfire troubleshooting procedures to verify its not a bad plug/boot/spring/COP/connector?

Welcome to the EX forum!
Tell us more about your EX and its troubles.

 

They said 30 psi cylinder 7, clinder 2, 3 150

 

Hoping someone has done arp head studs and could tell me what i cam use since i cant find any

 

They should be the same head studs that the 4.6 and 5.4L motor uses, just more of them.

ARP 1564101 Ford Mod 4.6 2V&4V Hex

Probably only sell 8 cylinder kits so you would need 2 kits.....at $285 each.

 

Thx so much i dont want to put bolts back in i think studs are best option at this point same length as well