what to do with this hole in eng block - Ford Truck Enthusiasts Forums



1973 - 1979 F-100 & Larger F-Series Trucks Discuss the Dentsides Ford Truck

what to do with this hole in eng block

Reply
 
 
 
Thread Tools Search this Thread
  #1  
Old 08-13-2017, 12:55 PM
Bulldog187th Bulldog187th is offline
Senior User
Thread Starter
 
Join Date: Nov 2003
Location: Southern Oregon
Posts: 195
Bulldog187th is starting off with a positive reputation.
what to do with this hole in eng block

So I have a 400 motor that I just rebuilt. And I noticed this hole after it came back from getting vatted out.


I forgot about it until after I put it all back together.

I believe its for a oil dipstick. But I have one that comes out of the pan.

So How do I seal this off so I dont have leak?
Reply With Quote
  #2  
Old 08-13-2017, 01:15 PM
smle smle is online now
Junior User
 
Join Date: Apr 2014
Posts: 70
smle is starting off with a positive reputation.
Wonder if anyone makes like a really small frost plug that would fit that.
Reply With Quote
  #3  
Old 08-13-2017, 01:23 PM
foofees's Avatar
foofees foofees is offline
Senior User
 
Join Date: Aug 2014
Posts: 154
foofees is starting off with a positive reputation.
I'd say keep it simple. Get a junkyard dipstick tube, clean it up, pinch/cut it off a few inches above the rubber plug and paint it. BOOM! Done. If anybody bends over far enough to see it, kick 'em in the rear. LOL
Reply With Quote
  #4  
Old 08-13-2017, 01:42 PM
matthewq4b matthewq4b is offline
Posting Guru
 
Join Date: Feb 2008
Location: St Albert, Alberta
Posts: 1,463
matthewq4b has a very good reputation on FTE.matthewq4b has a very good reputation on FTE.matthewq4b has a very good reputation on FTE.matthewq4b has a very good reputation on FTE.
Quote:
Originally Posted by Bulldog187th View Post
So I have a 400 motor that I just rebuilt. And I noticed this hole after it came back from getting vatted out.


I forgot about it until after I put it all back together.

I believe its for a oil dipstick. But I have one that comes out of the pan.

So How do I seal this off so I dont have leak?

If I recall correctly it is a 0.375 hole and a soft metal (brass) or deep 3/8" freeze plug will block it off.
freezeplugfactory.com
Reply With Quote
  #5  
Old 08-13-2017, 01:46 PM
mikeo0o0o0's Avatar
mikeo0o0o0 mikeo0o0o0 is offline
Post Fiend
 
Join Date: Apr 2009
Location: Davenport, Fl
Posts: 13,138
mikeo0o0o0 has much to be proud ofmikeo0o0o0 has much to be proud ofmikeo0o0o0 has much to be proud ofmikeo0o0o0 has much to be proud ofmikeo0o0o0 has much to be proud ofmikeo0o0o0 has much to be proud ofmikeo0o0o0 has much to be proud ofmikeo0o0o0 has much to be proud ofmikeo0o0o0 has much to be proud of
Quote:
Originally Posted by smle View Post
Wonder if anyone makes like a really small frost plug that would fit that.
Yes, they do. I'm not sure of the size but I believe its 3/8" diameter.
Reply With Quote
  #6  
Old 08-13-2017, 02:00 PM
Red Mercury Red Mercury is offline
Senior User
 
Join Date: Mar 2010
Posts: 211
Red Mercury is starting off with a positive reputation.
Quote:
Originally Posted by smle View Post
Wonder if anyone makes like a really small frost plug that would fit that.
That is the hole for the front dipstick when a front sump oil pan is used. From the factory, the hole was plugged with a small cup plug (frost plug) when a rear sump oil pan was used (4WD truck applications). A cup plug is the right fix, should be cheap & easy to find.

This plug has been on other posts on this site before. Some members had the right dimensions if you wanted to buy from a chain store and I believe Number Dummy may have also provided the Ford part number if you wanted to buy it from Ford.
Reply With Quote
  #7  
Old 08-13-2017, 02:49 PM
Bulldog187th Bulldog187th is offline
Senior User
Thread Starter
 
Join Date: Nov 2003
Location: Southern Oregon
Posts: 195
Bulldog187th is starting off with a positive reputation.
Quote:
Originally Posted by Red Mercury View Post
That is the hole for the front dipstick when a front sump oil pan is used. From the factory, the hole was plugged with a small cup plug (frost plug) when a rear sump oil pan was used (4WD truck applications). A cup plug is the right fix, should be cheap & easy to find.

This plug has been on other posts on this site before. Some members had the right dimensions if you wanted to buy from a chain store and I believe Number Dummy may have also provided the Ford part number if you wanted to buy it from Ford.
When you say Frost plug assume you are talking soft freeze plug?

I thought about dropping a short bolt with a bigger head and silicone it.
Reply With Quote
  #8  
Old 08-13-2017, 03:03 PM
smle smle is online now
Junior User
 
Join Date: Apr 2014
Posts: 70
smle is starting off with a positive reputation.
Depending what part of the country you live frost plug and freeze plug are one and the same.
Reply With Quote
  #9  
Old 08-13-2017, 03:04 PM
Bulldog187th Bulldog187th is offline
Senior User
Thread Starter
 
Join Date: Nov 2003
Location: Southern Oregon
Posts: 195
Bulldog187th is starting off with a positive reputation.
Quote:
Originally Posted by smle View Post
Depending what part of the country you live frost plug and freeze plug are one and the same.
Thank you , I kind of thought so , but just wanted to make sure
Reply With Quote
  #10  
Old 08-14-2017, 08:31 PM
Bulldog187th Bulldog187th is offline
Senior User
Thread Starter
 
Join Date: Nov 2003
Location: Southern Oregon
Posts: 195
Bulldog187th is starting off with a positive reputation.
update thank you all for the help. I finally found a 3/8 freeze plug. Got it in and place rvt sealer over the top of it just to make sure no leaks.
Reply With Quote
 
 
Reply

Related Topics
Thread Thread Starter Forum Replies Last Post
Rolling Stealth DeeDubz 6.7L Power Stroke Diesel 7 10-15-2017 07:49 PM
HID Projector Retrofit - HID's The RIGHT Way Evan_P 1987 - 1996 F150 & Larger F-Series Trucks 52 10-11-2017 08:19 AM
Attaching a Smog Pump Rick94110 1973 - 1979 F-100 & Larger F-Series Trucks 24 11-12-2016 04:27 PM
Drums drilled and ready to go IsaacCarlson Brakes, Steering, Suspension, Tires, & Wheels 4 11-08-2016 01:12 PM
1974 F100 Clutch return spring frame hole F100 Mechanic 1973 - 1979 F-100 & Larger F-Series Trucks 0 02-06-2016 02:11 PM


Go Back   Ford Truck Enthusiasts Forums >

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Forum Jump


All times are GMT -5. The time now is 04:53 PM.


We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.