Category: Exterior - Body Parts
Price: $100
Private or Vendor Listing: Private Listing
Part fits (you may select multiples): Fit
Item Condition: MS
Shipping Information: Item can be shipped
Engine: Part suitable for gas truck, Part suitable for diesel truck

I am parting out a Bullnose (1982) Flareside. Parts are in good shape and are all OEM. The main pieces are listed below but if you need something else, let me know.

Rustfree Flareside bed with tailgate. Great overall condition complete with tailgate. One fender shows slight damage, but is repairable. $1000





Both doors are available. Drivers door is perfect, passenger door will need some repair. $250 for the set.

Hood. $100

Front fenders. Both OEM and rust free. $100 each

Perfect cab with very minimal repair needed. $650

This truck has power front disc brakes and has the small 5x4.5 bolt pattern. $200 for complete front suspension.

Email for pics or any parts you need that aren't listed.

 

Adding a Dana 44 rear end out of Dentside F100 with 2.72 gears. $250

 

that you want to part out. restoring my 1982 f100 that i bought new, kept 27 years and just found it and bought it back. last owner let it go and it needs some tlc.

medictwofiveeightsix@yahoodotcom

 

Wish you where a little closer for that bed


Any way what motor did it have?
Looking for 300/six AC brackets & the bracket for the air filter housing to valve cover/head/? or where ever it went as I don't have one so don't know where it went.
Also if it was a 300/six did it have a fan shroud?


I do need the 2 upper radiator holder/mounts that bolt to the upper support and hold the radiator in place. This would be for a copper radiator NOT the alum/plastic one.
If you have them how much?
My homemade mounts I want to replace.



Thanks
Dave G.

 

Just seeing these replies. This truck has the 3.8 and 3 on the tree. I'll have to look for the Radiator mounts and see if they look like the ones you describe.

 

Here are the Radiator brackets.

 

I think they will work what do you want for both sides and shipping to 27501 in NC.
Also how do you want the money?
Thanks
Dave G.

 

I sent you a PM.

 

Still have a lot of good body parts for this truck available.

 

Hello. would you be interested selling the short bed frame ? How is the condition? depending on price i would pay freight for the bare frame. Send a PM or email if it is a possibility . work something out.

 

I would be interested in selling the bare frame. Here is how far it is torn down now. I was actually going to start removing the front suspension for a crown vic front end, but will sell before I start that.





I will send you a PM.

 

Hey bud,

Would you be willing to sell the power brake booster, and the fluid reservoir? If so, how much would you want for them?

Also, do you have, by any chance, a air filter housing? If you do, how much would you want for that?

Thanks for your time, Monkey 1!

David ( Keoneeli1 ) Cawdrey

 

These parts are already gone. Sorry, Keoneeli1.

 

I have to ask, right?

Thanks for your time!

David

 

You don't know if you don't ask!

Thanks!!