Parts to sell-Can Bring to Charlotte Autofair-do You guys use the Parts Forum ??
#1
Parts to sell-Can Bring to Charlotte Autofair-do You guys use the Parts Forum ??
Hey Guys,
I ended up Parts left over after Doing the 69 "Shop Truck"...
First Question is "do You guys look on the Parts Forum on here or list in general post like this??"
I am going to The Autofair in Charlotte this weekend and can bring any parts that people would want....
Since One Mans Trash is another's treasure, I have all The Stock stuff From My conversion That are of No use to me incl:
-Factory I beams
-Three speed Manual Trans-worked fine
-Bellhousing
-Clutch/Ptressure Plate/Throw out bearing etc etc- were all good
-Three Speed Manual Steering Column/Steering Wheel- worked fine
-Manual Linkages
-Several Air Cleaners
-Bench seat
-Glove Box doors
-Various Ranger emblems in various conditions
-Glove Box w/ Three way flasher switch
-Inside door trim
-C-6 Trans for F 250 w/Solid Tail Shaft ( would rebuild )
-Set of 4 Factory Ford Truck 80's "Wagon Wheels" with Trim Rings and center caps
-Dash Bezel (standard)
-D4 (1974) Auto Steering Column- Fresh Black Paint
-Manual Steering Linkages etc etc
-Ford Galaxie AM FM Stereo Radio D1AA Part #
A Couple of nicer things I didn't use but bought to use:
-Ford Ranger Talgate Chrome Panel insert
-a 69 Mach 1/Torino Hood scoop ( Factory Part not a Knock-off) Look great on these trucks-$75
I'm not at Garage to Look at Parts.....This is just what I remember...but could be more
Most Of these Items I have no use for but I Hate to Scrap it.....
ANY offer Taken on about everything except Hood Scoop and Tail Panel (which I bought ) so I need a little Money for....
I can Take pics and give descriptions on all the parts....
I'm in Greensboro NC and can bring things to Charlotte or Pick up here, Or ship if its reasonable to........
I ended up Parts left over after Doing the 69 "Shop Truck"...
First Question is "do You guys look on the Parts Forum on here or list in general post like this??"
I am going to The Autofair in Charlotte this weekend and can bring any parts that people would want....
Since One Mans Trash is another's treasure, I have all The Stock stuff From My conversion That are of No use to me incl:
-Factory I beams
-Three speed Manual Trans-worked fine
-Bellhousing
-Clutch/Ptressure Plate/Throw out bearing etc etc- were all good
-Three Speed Manual Steering Column/Steering Wheel- worked fine
-Manual Linkages
-Several Air Cleaners
-Bench seat
-Glove Box doors
-Various Ranger emblems in various conditions
-Glove Box w/ Three way flasher switch
-Inside door trim
-C-6 Trans for F 250 w/Solid Tail Shaft ( would rebuild )
-Set of 4 Factory Ford Truck 80's "Wagon Wheels" with Trim Rings and center caps
-Dash Bezel (standard)
-D4 (1974) Auto Steering Column- Fresh Black Paint
-Manual Steering Linkages etc etc
-Ford Galaxie AM FM Stereo Radio D1AA Part #
A Couple of nicer things I didn't use but bought to use:
-Ford Ranger Talgate Chrome Panel insert
-a 69 Mach 1/Torino Hood scoop ( Factory Part not a Knock-off) Look great on these trucks-$75
I'm not at Garage to Look at Parts.....This is just what I remember...but could be more
Most Of these Items I have no use for but I Hate to Scrap it.....
ANY offer Taken on about everything except Hood Scoop and Tail Panel (which I bought ) so I need a little Money for....
I can Take pics and give descriptions on all the parts....
I'm in Greensboro NC and can bring things to Charlotte or Pick up here, Or ship if its reasonable to........
#2
Thread
Thread Starter
Forum
Replies
Last Post
clintonvillian
1948 - 1956 F1, F100 & Larger F-Series Trucks
5
10-28-2014 10:11 AM
70-360fe
1967 - 1972 F-100 & Larger F-Series Trucks
19
07-16-2013 01:38 PM
KS70
1967 - 1972 F-100 & Larger F-Series Trucks
2
04-06-2004 06:36 AM