I pity the April Fool chat & BS thread
#241
#242
Evening All!
Tomorrow it's back to reality for a while. I have a few jobs to get out this week, AND pull the pyramid apart. High Roller has to be done this week for the open house in two weeks. I still need to get the battery box in Mongo, then put new batteries in there, too. After the hauler is squared away, I can tire the truck down and get it loaded up, ready to go. I have to be up there on Friday, the 28th to set up.
Tomorrow it's back to reality for a while. I have a few jobs to get out this week, AND pull the pyramid apart. High Roller has to be done this week for the open house in two weeks. I still need to get the battery box in Mongo, then put new batteries in there, too. After the hauler is squared away, I can tire the truck down and get it loaded up, ready to go. I have to be up there on Friday, the 28th to set up.
#244
Need help on my summer project.... i need ideas etc help on my mini shop...i will eventually build a bigger barn, garage to keep all my cars and trucks, but this might remain where i work on them for the most part... thinking of enclosing the front end, and having 2 big sliding barn doors in front...and a sliding barn door for the short door out back... lots more led lighting, work benches down one whole wall... lean to on one side using poles as not to put weight on this structure....
Here is a pic of the short door out back...
#245
I will start a thread on this to keep these ideas and ideas for my future big shop build...
https://www.ford-trucks.com/forums/1...l#post17119622
https://www.ford-trucks.com/forums/1...l#post17119622
#246
#249
#250
Yea Alan I saw the yellow wagon. Be nice if several of us would be able to run together. Not many activities where that many cars get together and drive. I usually drive the 39 ford since it is more road friendly, but if a few others wanted to go I would drive the 55 ford pickup, if I still have it next year.
#251
What up fellers!
We're at 17 day's a less than 12 hours!
Just finished feeding the neck, then off for a beer run. I'm taking advantage of the weather, and have some Hickory wood that I didn't sell, to use up. So there's a couple of day's that the ol' Smoker will be stoked. I'm thinking this is the same smoker that I'm donating to the Shaker Racing Team.
Three stores down, and can't find my Honey Brown that I like having when I'm staying put, and babysitting the smoker.
Unk Bob
We're at 17 day's a less than 12 hours!
Just finished feeding the neck, then off for a beer run. I'm taking advantage of the weather, and have some Hickory wood that I didn't sell, to use up. So there's a couple of day's that the ol' Smoker will be stoked. I'm thinking this is the same smoker that I'm donating to the Shaker Racing Team.
Three stores down, and can't find my Honey Brown that I like having when I'm staying put, and babysitting the smoker.
Unk Bob
#252
#253
Evening all.
Good news is that the wife's car is finally home and looks good with new rubber. It didn't go as it was supposed to and I'm not terribly pleased, but the final cost came out much less than expected so there's that. After another delivery of the wrong parts, they managed to finally free up the cam bolts enough to set the alignment without them (hence lower cost - no new parts). I'm glad its done and hopefully it will stay aligned for a little while. If it goes out again, I'm going to get new lower control arm bushings and cam bolts and change them out myself before taking in for alignment.
At least that was most of the day's excitement and now its time to chill.
Good news is that the wife's car is finally home and looks good with new rubber. It didn't go as it was supposed to and I'm not terribly pleased, but the final cost came out much less than expected so there's that. After another delivery of the wrong parts, they managed to finally free up the cam bolts enough to set the alignment without them (hence lower cost - no new parts). I'm glad its done and hopefully it will stay aligned for a little while. If it goes out again, I'm going to get new lower control arm bushings and cam bolts and change them out myself before taking in for alignment.
At least that was most of the day's excitement and now its time to chill.
#254
#255
good morning Missouri..
sounds like carina may be replacing you soon alan.... ha ha ha ha
so far it looks cloudy and dreary out there.. I got my flexplate yesterday so I am out of excuses for not working on the blue bronco.... maybe I can actually make some forward progress on that project
sounds like carina may be replacing you soon alan.... ha ha ha ha
so far it looks cloudy and dreary out there.. I got my flexplate yesterday so I am out of excuses for not working on the blue bronco.... maybe I can actually make some forward progress on that project