1987 - 1996 Ford trucks, parts for sale and wanted.
#121
#123
Local Pick Up Only - Lake Jackson TX
If you are interested in anything I can send pictures. It wouldn't be worth shipping any of these parts as they are so if you don't want to pick them up don't contact me.
If nobody wants em most of these will be headed to recycling or the landfill soon.
$20 - 92/96 XLT Power Mirrors, Black & Chrome, Original Ford, Working condition - 8 out of 10 condition wise: glass has a slight haze, plastic is a little faded.
Free - 92/96 XLT Radiator Grille, Black & Silver, Original Ford - 5 out of 10 condition wise: Hairline crack on top, no rubber insulators on bottom tabs, some fading.
$10 each - 2 XLT Tailgate Panels - One has Black Stripe and one has the older Red Stripe - Original Ford - 5 out of 10 condition wise: both have dents, missing hardware, haze.
Free - 92/96 Instrument Cluster Surround - Original Ford - 4 out of 10 condition wise: broken tabs, no trim, hole drilled in one of the panels.
$10 - Early Small Body Ranger In Bed Spare Tire Bracket and Reinforcement - Original Ford - 6 out of 10 condition wise - some rust, but could be put into service as is.
$5 each - 2 Ford 8.8 Differential Covers - Original Ford, Steel - 7 out of 10 condition wise - normal exterior rust.
If you are interested in anything I can send pictures. It wouldn't be worth shipping any of these parts as they are so if you don't want to pick them up don't contact me.
If nobody wants em most of these will be headed to recycling or the landfill soon.
$20 - 92/96 XLT Power Mirrors, Black & Chrome, Original Ford, Working condition - 8 out of 10 condition wise: glass has a slight haze, plastic is a little faded.
Free - 92/96 XLT Radiator Grille, Black & Silver, Original Ford - 5 out of 10 condition wise: Hairline crack on top, no rubber insulators on bottom tabs, some fading.
$10 each - 2 XLT Tailgate Panels - One has Black Stripe and one has the older Red Stripe - Original Ford - 5 out of 10 condition wise: both have dents, missing hardware, haze.
Free - 92/96 Instrument Cluster Surround - Original Ford - 4 out of 10 condition wise: broken tabs, no trim, hole drilled in one of the panels.
$10 - Early Small Body Ranger In Bed Spare Tire Bracket and Reinforcement - Original Ford - 6 out of 10 condition wise - some rust, but could be put into service as is.
$5 each - 2 Ford 8.8 Differential Covers - Original Ford, Steel - 7 out of 10 condition wise - normal exterior rust.
#124
ZF S5-47 and Parts for Sale
*All items including transmission has been SOLD*
I have a ZF5 transmission and various other parts for sale. This transmission came out of a 1996 Ford F-250, 4x4 with the 351w. It will also fit the 302 and 300 I6 bellhousings. The truck was running and driving before it was involved in a collision. I also have many parts for this transmission, some are new. They are listed below:
Shifter Boot- New (OEM Ford Parts)
Flywheel - New (Sachs) ((This particular flywheel will only work for the 351w))
Master Cylinder-New (Ford Parts)
Hydraulic Clutch Line- New (Ford Parts)
Clutch Release Bearing and Slave Assembly- New (Ford Parts)
Flywheel Bolts- New (Ford Parts)
ZF5 gasket kit- New (NOS Ford Parts)
Manual Transmission/Engine Cover- Used (OEM)
Manual Transmission Crossmemeber- Used (OEM)
Clutch/Brake Pedal Assembly- Used (OEM)
Manual Transmission Steering Column Shroud- Used (OEM)
As you can see, this is a near-complete setup for someone who wishes to convert their automatic to a manual or someone who is simply looking for the transmission or in need of parts.
I would prefer to unload this as a lot but am open to parting out. Please PM me for more information and pictures.
Thanks.
I have a ZF5 transmission and various other parts for sale. This transmission came out of a 1996 Ford F-250, 4x4 with the 351w. It will also fit the 302 and 300 I6 bellhousings. The truck was running and driving before it was involved in a collision. I also have many parts for this transmission, some are new. They are listed below:
Shifter Boot- New (OEM Ford Parts)
Flywheel - New (Sachs) ((This particular flywheel will only work for the 351w))
Master Cylinder-New (Ford Parts)
Hydraulic Clutch Line- New (Ford Parts)
Clutch Release Bearing and Slave Assembly- New (Ford Parts)
Flywheel Bolts- New (Ford Parts)
ZF5 gasket kit- New (NOS Ford Parts)
Manual Transmission/Engine Cover- Used (OEM)
Manual Transmission Crossmemeber- Used (OEM)
Clutch/Brake Pedal Assembly- Used (OEM)
Manual Transmission Steering Column Shroud- Used (OEM)
As you can see, this is a near-complete setup for someone who wishes to convert their automatic to a manual or someone who is simply looking for the transmission or in need of parts.
I would prefer to unload this as a lot but am open to parting out. Please PM me for more information and pictures.
Thanks.
Last edited by EllieMae94; 09-03-2019 at 05:04 PM. Reason: Added Info
#125
Join Date: Mar 2005
Location: Marlboro Mental Hospital.
Posts: 60,965
Received 3,099 Likes
on
2,161 Posts
#130
#131
#135
Join Date: Mar 2005
Location: Marlboro Mental Hospital.
Posts: 60,965
Received 3,099 Likes
on
2,161 Posts