When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Fresh rebuild Big Block C6 out of a 1989 F250 4X4. Has new torque converter, light shift kit for firmer but not hard shifts. Had this rebuilt for a truck I was to rebuild, ended up finding something eles. Questions feel free to ask. Not a mile on unit, not been installed since rebuild. Everything inside was soaked in fluid in-case it needed to sit before install. Bell housing should bolt up to a 351M, 429, or 460. Ive got $900 in it might be willing to take a little less. Just trying to re-cope what I've got in it.
Want to swap my front bench seat for split bucket seats with center console. Would prefer a color match with the rear seat or can swap out the entire set.
Also, could use a tail gate.
missing tail gate front seats back seats back of the front seats option on the front seat (back bolster?)
Want to swap my front bench seat for split bucket seats with center console. Would prefer a color match with the rear seat or can swap out the entire set.
Also, could use a tail gate.
missing tail gate front seats back seats back of the front seats option on the front seat (back bolster?)
I’m colorblind and can’t tell by the pics, are those seats tan or grey? Where are you located?
Looking for a full set of steel lug nuts that fit on my F250. Bought the truck with aftermarket rims, I went back to original steel wheels. m3fenton@aol.com
I had my wheels/tires stolen off my '97 F350 and insurance replaced them with factory wheels (they were not factory wheels). I picked up some other wheels that I like better so I'm selling the factory wheels to recoup some of those costs. They were mounted by Discount Tire and driven for about 100 miles before the new wheels arrived. They are reconditioned in near perfect (if not perfect) condition. They were purchased from Auto Rim Shop, part number W3140 for $425 each. Asking $250 each plus shipping. If you are interested I'll take full pics of each wheel front and back prior to final sale just so you have all the info. Will ship in the boxes I received my new wheels in (fully wrapped and protected).
Will be going with a spray in bedliner to suit my needs so the plastic one has to go. Real good shape, under rail fit, resided under a slide in camper. Has a cut out for the power plug (visible ahead of the wheel well in the first pic) . What you see is what you get. I don’t know what these go for new but thought $50 would be a fair ask with proceeds to go towards the spray-in liner. It will remain in the bed for the future owner to remove, pick up in Reseda, CA.
10-22-2020, 03:23 PM
