1963 Ranchero w/ a engine swap
#46
am i loosing some of ya??
welded the fuel tank braces in today.
welded in the upper shock mounts, and mounted shocks in the rear.
got my powersteering pump and alternator mocked up.
this is the way v-belts are supposed to look!
I still need to make spacers and tensioners, but it don't look like its going to be hard at all.
grabed the gp38's out of storage.
and its time for headers!
I think these turbos are too big...
welded the fuel tank braces in today.
welded in the upper shock mounts, and mounted shocks in the rear.
got my powersteering pump and alternator mocked up.
this is the way v-belts are supposed to look!
I still need to make spacers and tensioners, but it don't look like its going to be hard at all.
grabed the gp38's out of storage.
and its time for headers!
I think these turbos are too big...
#47
Join Date: Mar 2005
Location: Marlboro Mental Hospital.
Posts: 60,975
Received 3,102 Likes
on
2,164 Posts
#49
#52
its just a machine! super simple to throw together.
i have been building customs heavily for the past 15 years.
it only looks easy because ive done many of them.
still by no means a professional, but im getting there!
just wanted to make sure im not posting somthin no one gives a rats ash about lol
here was MY first true custom that ive done for myself. built it back in 03 and still tweaking it lol
time to build a header! catch ya later
i have been building customs heavily for the past 15 years.
it only looks easy because ive done many of them.
still by no means a professional, but im getting there!
just wanted to make sure im not posting somthin no one gives a rats ash about lol
here was MY first true custom that ive done for myself. built it back in 03 and still tweaking it lol
time to build a header! catch ya later
#54
I'd only wanna drive that thing if wearing a hat tall enough to stick out the top, and with a brim about 10 feet around. And a fake gold tooth cap. That, or dressed up like Herman Munster....
His whole place has the best "p!ss off the neighbors" thing going that I've ever seen.
His whole place has the best "p!ss off the neighbors" thing going that I've ever seen.
#55
you are what you eat. hahahahah
so i didn't get much done today.
went to build headers and the straight pipe i have is 2.25 and the bends are 2"
DRATS!
on hold till Monday.
had a few friends come over to visit, so needless to say it was a saporro and Gorilla scout cookies kinda day.
im pretty hammered right now,
TGIF
#59
Alternator
IDIoit, talk to me about the alternator. Especially the mount. I think my vacuum pump is currently taking that space. Did you just eliminate the vac pump? I guess you may not even need vacuum, I still do, for now. Still, your mount gives me ideas. Is that a GM 1 wire?
My '86 6.9IDI has electrical gremlins. I've done grounds and more grounds, new V-regs after new V-regs. I'm done. One way or another, I'm doing a GM 1 wire.
My '86 6.9IDI has electrical gremlins. I've done grounds and more grounds, new V-regs after new V-regs. I'm done. One way or another, I'm doing a GM 1 wire.
#60
Join Date: Mar 2005
Location: Marlboro Mental Hospital.
Posts: 60,975
Received 3,102 Likes
on
2,164 Posts