Take your VIN and download your As-Built data from Ford. Then look to see what 7D0-02-01 data is. There might not be any or there might be similar settings.

https://www.motorcraftservice.com/AsBuilt

 

I have downloaded it but haven't or don't know how to open it to look at the info.

 

you can open it with notepad on the computer or use excel spreadsheet. I use notepad most times.

 

Sorry, I did my Expy and turned off the horn honk when you get out with the fob and it's the 726 sector. The apim is the 7D0 one as you stated. My truck is a 2013.

 

I was able to read it with Notpad, it was a little hard to read but I got it. I also have 7D0-02-01 showing up, but the codes are different I have *3** **** ****. It probably came up the first time I looked at it and I probably thought it was just garbage. LOL

 

I just highlighted, copied and pasted to Word instead of opening the file

 

Trying to enable DPF% in my 2016 and the values in IPC do not match either listed in the spreadsheet. I didn't mess with it. Am in the wrong IPC? There is one with AS BUILT format and one without. I backed up all my AS BUILT format modules. Also found a window sticker for my truck which I will upload to my folder on the google drive.


I dropped a rar of all my forscan orig backups as well as a picture of my window sticker into the folder I created on Google drive.

 

I believe that if you "Enable" "Forced Regen Request" and DPF% Screen Enabled you will be ok. Try enabling Force Regen Request first and see what happens.

 

Thanks for the advice Larry. Works. Updated before and after pic and one of the functioning dash attached.

 

Mike, glad you got it and it worked for you. Keep the faith...lol...

 

 

 

Meaning what? Did some of the changes not do as stated?

 

Thanks for all the work on this stuff! I was able to get it working. Added DPF% screen, fog lights for DRL and fog lights with high beams!

 

+1, got my nav working full time. Sweet for when we're traveling!