Mercury Custom cab Unibody
#1
Mercury Custom cab Unibody
My dad and I winched this old beast out of the tall grass today at a neighbours place. Rusted as heck and hasn't run in 20 plus years. Other than the tailgate its pretty much all there. I didn't get any pictures of inside or under the hood, but it looks like the same 223 in my 64 f100. Big rear window with a nice piece of chrome underneath as well as funky hood ornamentation..
I was not aware the door body line is straight on the unibody, as opposed to the little dog leg on the other slicks The fenders appear to be interchangeable, is this the case? What other parts beside the actual cab/bed are specific to the uni?
I was not aware the door body line is straight on the unibody, as opposed to the little dog leg on the other slicks The fenders appear to be interchangeable, is this the case? What other parts beside the actual cab/bed are specific to the uni?
#3
#4
Ya, the bird is as ND said 55 Chrysler part #159985 8 D G all over ebay. I had no doubt it was added by a previous owner. I could only find these two different Merc car "M" emblems:
The one on the truck is different, the top and bottom of the M go further up and further down, and the inside is grooved. Muppy, I think you are correct that this M is original to the truck, as after searching out mercury unibodies came up with a couple, like this 63..
The one on the truck is different, the top and bottom of the M go further up and further down, and the inside is grooved. Muppy, I think you are correct that this M is original to the truck, as after searching out mercury unibodies came up with a couple, like this 63..
#5
Hood
Ya, the bird is as ND said 55 Chrysler part #159985 8 D G all over ebay. I had no doubt it was added by a previous owner. I could only find these two different Merc car "M" emblems:
The one on the truck is different, the top and bottom of the M go further up and further down, and the inside is grooved. Muppy, I think you are correct that this M is original to the truck, as after searching out mercury unibodies came up with a couple, like this 63..
The one on the truck is different, the top and bottom of the M go further up and further down, and the inside is grooved. Muppy, I think you are correct that this M is original to the truck, as after searching out mercury unibodies came up with a couple, like this 63..
#6
#7
Yup, the Big M's came on the '61-'63 Merc trucks, there is almost always at least one f/s on kijiji.
AND, I went out to the garage and had a look at the (really rough) one I have, and the number cast into the back is as follows: CDCITB 16637-B
The Big M is very close to 28 inches across
**Sorry about pic orientation, I dumped them straight from my phone.....
AND, I went out to the garage and had a look at the (really rough) one I have, and the number cast into the back is as follows: CDCITB 16637-B
The Big M is very close to 28 inches across
**Sorry about pic orientation, I dumped them straight from my phone.....
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
APurpleFord
1987 - 1996 F150 & Larger F-Series Trucks
46
06-26-2016 10:06 AM
oscajo
1948 - 1956 F1, F100 & Larger F-Series Trucks
3
09-14-2015 08:19 PM
fiftyfordfloored
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
15
08-27-2008 12:18 PM