When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
my F100 has 3/4 ton hubs up front and a 4.56 Dana/Spicer rear end. The front brakes measure 12 1/8" X 2". got some wheel cylinders from Oreally? and the aren't like these. Can anyone tell me what these are and give me an OE number. every parts house shows something different. I just looked at Napa and found they show two different thread sizes for these, 3/8 X 24 and 7/16 X 20
my F100 has 3/4 ton hubs up front and a 4.56 Dana/Spicer rear end. The front brakes measure 12 1/8" X 2". got some wheel cylinders from Oreally? and the aren't like these. Can anyone tell me what these are and give me an OE number. every parts house shows something different. I just looked at Napa and found they show two different thread sizes for these, 3/8 X 24 and 7/16 X 20
1961/64 F250 2WD with 12 1/8" x 2" front brakes: C1TT-2061-F Right & C1TT-2062-F Left .. Front Wheel Cylinders are 1 1/8" diameter / Obsolete - Available NOS
Note: OP is aware...as he sent me an email. I passed along the part numbers, the quantity available and the sources.
09-23-2016, 09:59 PM
