When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
New to the site and new to the diesel world. I have an 02, I picked up a SCT livewire and have been playing around with it. I have some questions on a few sensors. 1st is the ebps, it was plugged when I bought the truck. I cleaned it out and was getting a reading of 51psi at idle. Today I picked up a new motor craft sensor and replaced thinking it was bad but with koeo the sensor reads 46 psi. I took the sensor out and it still reads 46. At idle it is 48. Second is the waste gate duty cycle should this % change?? The only time I see it change from 0 is when I set the cruise. Then it's anywhere between .38 & .52 depending on how fast I'm going. I've attached a snap shoot off reading for more info. Any help is appreciated
Check out my thread here - https://www.ford-trucks.com/forums/1...-pressure.html. Bottom line, the SCT X4 didn't read correctly at all for me and at least one other person. My numbers looked real similar to what you are pulling up with the Livewire. I switched to Torque Pro and haven't looked back.
