I was looking through images for pictures of 3-1/2 inch stacks and found this.




An Anheuser-Busch beer keg was repurposed as a diesel fuel cell using brackets welded to the bed.



FrankenFord - 1960 Ford F-100 with a Caterpillar Diesel Engine Swap

Devin

 

I am about 99% sure that beer kegs have a plastic liner. I wonder what happened to that liner when he welded the tabs and filler neck on?

 

Sure hope ni beer was wasted on that project.

 

This is a fuel tank LOL:



120us gallons, plumbed in with an extra tank switch, leaving both stock tanks functional... LOL

 

It's an Anheuser-Busch barrel, so indeed, no beer was involved...... (if anything, dumping the original contents constitutes a community service....)

 

I built a 70 gallon auxiliary tank for my truck, but it needs a bit more work before it can go into service. The new chassis has dual tanks as well, so over 100gallons of capacity, it will be able to go nearly cross-country on one (expensive) fill up.