I have a no limit CCV bypass and have noticed that there is a considerable amount of blow by coming out the pipe and it's noticeable when I'm at a stoplight or drive-thru and I'm wanting to run it into the exhaust but not sure the right way to do it I don't want to create pressure from the exhaust pipe. Does anyone have pictures of how they've done it and a quick explanation.

 

Something like this is what you would want to do. If I (let's be honest) when I do my kit, it will look something like this. Keep it at a 45* angle and you should be good.

 

Does it need to extend into the pipe some and you don't think it will create any pressure even at wide open throttle? Ever since I installed an 63mm non vgt kit it seems to have been smoking more.

 

It will need to extend into the exhaust. At the right angle, it will pull a slight vacuum with no issues.