Hey guys I'm having some trouble deciding what size tires to go with for my truck. The stock size for my truck was 15x7.5 but I recently bought some Dick Cepek DC-2 16x8's. I want to put some General Grabber AT2's that are 285 75R16's but I'm not sure if I could get buy with a Rough Country 1.5" Leveling Kit. Any ideas or insight to this? Would I need a bigger lift for this? Or would the leveling kit give it enough clearance all around? I don't want to go too big on tires and lift since it's only a 2WD. Any help would be nice!

 

you MIGHT clear with a 1.5''.I would kinda doubt it though,

Stock tires size is 235/75/15 which is about 28.5'' I think and a 285/75/16 is about a 33''

 

Ive rethought my decision since then and now im considering running 16's and 31's. I would think that should be enough clearance right?

 

31x10.5's should clear with a leveling kit no problem.

Save yourself some money and get the moog cc824 springs. And get an alignment afterwards or your new tires will not like you very much hehe.