A little upgrading
Thread Starter
|
Senior User
Joined: Nov 2012
Posts: 165
Likes: 0
A little upgrading
Decided to do a little upgrading again. The truck has come a long way in the last year I've had it. Started as a gasser that I bought from a kid, swore I'd never buy another truck from a high school kid again. Did a RSK with v/b codes and bilstein 5100's. 17" fuel hostage wheels and 35" bfg AT KO2's. DIY e-fuel. Baby swamps and an Adrenaline hpop. Had Tony Wildman burn my ts-6. Installed a new headliner and vinyl floor a few months ago. And just installed seats from a '10 F150. A lot of other small odds and ends. Still have more to do, some more interior pieces, spray in bed liner, new paint... It never ends. I've received a lot of help from this forum and others and wanted to say thanks.
Thread Starter
|
Senior User
Joined: Nov 2012
Posts: 165
Likes: 0
The fronts weren't bad. I mounted them to my original seat mount. I still need to figure out a way to lower the center a few inches though. The rears were a little more difficult. The rear mounts went thru the pan and I braced underneath. Their front mount , which is close to the rear, I built a cross frame and mounted it to the factory seats rear studs. I can flip the bottom cushions up and use the floor for storage. I still need to finish it up and paint it. I'll take more pics tomorrow of the mounts.
Thread
Thread Starter
Forum
Replies
Last Post
TNScrambler
1994.5 - 1997 7.3L Power Stroke Diesel
22
Jun 6, 2013 03:31 PM
Kuskoal
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
4
Dec 6, 2009 01:42 PM
Ford4x4-JD70AB
1987 - 1996 F150 & Larger F-Series Trucks
8
Apr 19, 2006 11:00 AM
