New (to me) '97
#18
Onto the next project!! Anyone care to recommend gauges? I'll be doing some forum searches tonight
#19
#20
#21
Got a little work done today. Removed the dash and REMOVED the old, hacked up security system. Lots of zip ties and chunks of wire on the floor today! I also re-mounted the 3-position switch for my PacBrake. Anyone else have this configuration? It is the type mounted directly to the back of the turbo not down the pipe. It has a vacuum/electric actuator. I have not messed with it too much but it seems to work great. The PO drilled the hole too large for the switch and used some kind of silicone to fill it in. Needless to say, ti did not work well. I removed it and added a washer (painted black, who likes shiny stuff anyway??) and remounted. Not bad, for now.
Also, here is a shot after a thorough cleaning, using an Eagle One mitt and then a wax job along with a tint job.
Also, here is a shot after a thorough cleaning, using an Eagle One mitt and then a wax job along with a tint job.
#22
Bought my first Power Stroke yesterday!
1997 F-350, 7.3L, RWD, DRW, 134,000 miles, 1 owner, pac brake, seems to run and drive great! Pretty much just going to use it for a trailer hauler for family trips but I' pretty much in love with it!
[url=https://flic.kr/p/uzu1GT]
1997 F-350, 7.3L, RWD, DRW, 134,000 miles, 1 owner, pac brake, seems to run and drive great! Pretty much just going to use it for a trailer hauler for family trips but I' pretty much in love with it!
[url=https://flic.kr/p/uzu1GT]
Thread
Thread Starter
Forum
Replies
Last Post
riverrat41
1999 - 2003 7.3L Power Stroke Diesel
12
01-26-2009 02:22 PM
cdrmotorsports
1994.5 - 1997 7.3L Power Stroke Diesel
28
10-05-2007 08:56 AM