Needed! connector for fuel bowl heater/water in fuel
#1
Join Date: Mar 2015
Location: Blairsville, Pennsylvania
Posts: 5,277
Likes: 0
Received 26 Likes
on
26 Posts
Needed! connector for fuel bowl heater/water in fuel
Yep, I broke it. The connector on the harness that plugs into the fuel bowl for the heater and water-in-fuel sensor
How did I do it? Well, it "started" with a no-start about month or two ago, disconnecting it and the ICP plug as a test (in case the heater was shorted)
It ended with me being too clubby-fumble-fingered and breaking off the clip. Now the connector won't
So now I need the connector, preferably with a little bit o' wire that I can splice into my harness
Anyone have one? Perhaps someone who has eliminated their fuel bowl?
How did I do it? Well, it "started" with a no-start about month or two ago, disconnecting it and the ICP plug as a test (in case the heater was shorted)
It ended with me being too clubby-fumble-fingered and breaking off the clip. Now the connector won't
So now I need the connector, preferably with a little bit o' wire that I can splice into my harness
Anyone have one? Perhaps someone who has eliminated their fuel bowl?
Thread
Thread Starter
Forum
Replies
Last Post
TNT in Round Rock
1999 - 2003 7.3L Power Stroke Diesel
6
03-15-2012 07:47 PM
Scoutmaster
Pre-Power Stroke Diesel (7.3L IDI & 6.9L)
2
04-06-2008 11:58 AM
myf350truck
1999 - 2003 7.3L Power Stroke Diesel
2
06-19-2006 08:13 PM