Rebuilder's Title for 1980-'86 Ford F-100/F-150 w/ 6-3/4' StepSide
#1
Rebuilder's Title for 1980-'86 Ford F-100/F-150 w/ 6-3/4' StepSide
Can does anybody about the Rebuilder's title law for the State of Arkansas,The reason I'm asking is about it,I'm thinking building a 1980-'86 Ford F-100/F-150 StepSide Tandem Axle Pro Street Pickup powered by FORD/Jon Kaase 829 cubic inch (BOSS 829) Mountain Motor w/10.5:1 Compression Ratio for street use,How much does a 1980-'86 Ford F-100/F-150 w/ 6-3/4' StepSide go for in fair condition,I've priced the 6-3/4' StepSide Bed from DVAP (Desert Valley Auto Parts) @ $550 (each) is it for the whole bed besides for the tailgate,Also how much does (4) Fiberglass StepSide Fenders for a 1980-'86 Ford F-100/F-150 w/ 6-3/4' StepSide go for,I'm hoping I don't have to take the (4) Fiberglass StepSide Fenders and make them out of Carbon Fiber,If the StepSide Fenders are in rough shape.
BroncoDually
BroncoDually
Last edited by BroncoDually; 04-26-2015 at 04:48 PM. Reason: Typing
#3
#5
Rebuilder's Title for 1980-'86 Ford F-100/F-150 w/ 6-3/4' StepSide
cookie88,This want I'm talking about:
I'm going to use (2) Chris Alston/ChassisWorks 2" x 4" Back-Halfs for the (4) 15" x 16" (or 15" x 18") Rear Rims/Tires for my 1980-'86 Ford F-100/F-150 StepSide Tandem Axle Pro Street Pickup,I know how I'm going to connect the (2) Chris Alston/ChassisWorks 2" x 4" Back-Halfs
I'm going to use (2) Chris Alston/ChassisWorks 2" x 4" Back-Halfs for the (4) 15" x 16" (or 15" x 18") Rear Rims/Tires for my 1980-'86 Ford F-100/F-150 StepSide Tandem Axle Pro Street Pickup,I know how I'm going to connect the (2) Chris Alston/ChassisWorks 2" x 4" Back-Halfs
#6
My suggestion would be to contact your local DFA office...they can explain the law to you and answer any questions you might have. If you click on the state on the left side, it will point you toward your nearest office (if you don't know)
http://www.dfa.arkansas.gov/Pages/default.aspx
These forms might be of interest to you as well since your talking about a salvage or custom title...
Salvage title application:
http://www.dfa.arkansas.gov/offices/...fSalvageMV.pdf
Street Rod/Custom Vehicle plate:
http://www.dfa.arkansas.gov/offices/.../StreetRod.pdf
http://www.dfa.arkansas.gov/Pages/default.aspx
These forms might be of interest to you as well since your talking about a salvage or custom title...
Salvage title application:
http://www.dfa.arkansas.gov/offices/...fSalvageMV.pdf
Street Rod/Custom Vehicle plate:
http://www.dfa.arkansas.gov/offices/.../StreetRod.pdf
#7
Trending Topics
#8
#9
cookie88,This want I'm talking about:
I'm going to use (2) Chris Alston/ChassisWorks 2" x 4" Back-Halfs for the (4) 15" x 16" (or 15" x 18") Rear Rims/Tires for my 1980-'86 Ford F-100/F-150 StepSide Tandem Axle Pro Street Pickup,I know how I'm going to connect the (2) Chris Alston/ChassisWorks 2" x 4" Back-Halfs
I'm going to use (2) Chris Alston/ChassisWorks 2" x 4" Back-Halfs for the (4) 15" x 16" (or 15" x 18") Rear Rims/Tires for my 1980-'86 Ford F-100/F-150 StepSide Tandem Axle Pro Street Pickup,I know how I'm going to connect the (2) Chris Alston/ChassisWorks 2" x 4" Back-Halfs
Thread
Thread Starter
Forum
Replies
Last Post
BroncoDually
Iowa Chapter
1
04-29-2015 09:37 PM
BroncoDually
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
5
04-18-2015 08:37 PM
BroncoDually
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
6
10-20-2009 06:42 PM
BroncoDually
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
1
12-14-2008 07:59 PM