If any one can point me to a good shop I could really use the help I'm not from elpaso or anywhere near it... Just need a shop I can trust... All I need is a head gasket and some arp studs installed its a 6.0 if you are from the area please let me know... If not please keep your comments to yourself

 

First off guys will need to know what motor you have to really be able to help you out with this. Also how do you know that the head gasket is toast?

 

If it's a 6.0 and you up to getting it 15 Hrs down the road I know a very good place.
in Grain Valley, MO 64029
SDS Or Super Duty Service. He is a member here.



Sean

 

Where are you originally from, and can you leave it in El Paso and come back and get it with a trailer?

Last time I was in El Paso was 25+ years ago, and there were no good shops/machinists I knew of back then.

Good luck, sorry for your troubles.

 

Sorry guys but not one of you have helped me wut I ment to say is.... Hey if you are from elpaso and know a good shop let me know cause I'm in elpaso and need my truck fixed in elpaso... I'll need to re word my thread

 

We're trying to help you, first thing you need to do is post what engine you have so the guys in the area can get you pointed in the right direction.

Also since you have access to the inter web, post it down in the Tx chapter section as well.

If all else fails head to the dealer.

I am of no help as I am in NY.

Sarge

 

Check with the local FTE chapter and ask in there forum.
That may give you the answer you need.

Sean

 

Was trying to help with asking how you know your head gasket is toast. You've come to a site with an immense wealth of knowledgeable people who may be able to help you save some money if you give us more info. What is your truck doing to lead you to believe that your head gasket is gone?