Jolly Green Giant...2015 F-350 KR DRW
#7696
11-06-2017, 12:26 PM
Join Date: Sep 2011
Location: Great Falls, Montana
Posts: 62,139
Received 3,991 Likes
on
1,598 Posts
It is a wee bit chilly here.....4*F / -15*C
Of Course, It IS your fault.....Canada dumped the cold air on us......
#7698
11-06-2017, 08:55 PM
Join Date: Sep 2011
Location: Great Falls, Montana
Posts: 62,139
Received 3,991 Likes
on
1,598 Posts
Funny you should ask.........
Tomorrow Canada is supposed to start taking back its cold air.......
40's by Friday......
Tomorrow Canada is supposed to start taking back its cold air.......
40's by Friday......
#7699
11-07-2017, 10:45 PM
Hotshot
Roy, I think you're sending it to Texas. The wind just started blasting out of the north an hour ago and the highs tomorrow will be in the 50's here, compared to the upper 80's and low 90's the last week.
#7700
11-08-2017, 12:13 AM
Join Date: Sep 2011
Location: Great Falls, Montana
Posts: 62,139
Received 3,991 Likes
on
1,598 Posts
50's is excellent working outside weather.......
#7701
11-08-2017, 12:26 AM
Hotshot
Yes, and thankfully it will stick around long enough for me to get my days off so I can actually enjoy working outside in it!
#7702
11-08-2017, 12:33 AM
Join Date: Sep 2011
Location: Great Falls, Montana
Posts: 62,139
Received 3,991 Likes
on
1,598 Posts
Working in the heat is not fun......
#7703
11-08-2017, 12:52 AM
Hotshot
I put off the repairs to the RV all summer because of the heat and humidity. I'm looking forward to getting it wrapped up.
#7704
11-08-2017, 01:06 AM
Join Date: Sep 2011
Location: Great Falls, Montana
Posts: 62,139
Received 3,991 Likes
on
1,598 Posts
Need some high 40's at least for a couple of days.....
Today the final part arrived for my Primary laptop......
About half done. hopefully she'll be running great tomorrow.....
#7705
11-08-2017, 01:17 AM
Hotshot
I wondered if you ever fixed the suspension issue. I can see that job being more difficult with cold fingers.
Good luck with the laptop. As you previously mentioned, I would have trouble just getting the keyboard off. I've replaced several LCDs and plenty of hard drives and lots of RAM, but never a motherboard in a laptop. One of my very best machines was a desktop that I built several years ago for producing A/V. I bought a pile of components and put it all together. Amazingly, it worked.
Good luck with the laptop. As you previously mentioned, I would have trouble just getting the keyboard off. I've replaced several LCDs and plenty of hard drives and lots of RAM, but never a motherboard in a laptop. One of my very best machines was a desktop that I built several years ago for producing A/V. I bought a pile of components and put it all together. Amazingly, it worked.
#7706
11-08-2017, 01:33 AM
Join Date: Sep 2011
Location: Great Falls, Montana
Posts: 62,139
Received 3,991 Likes
on
1,598 Posts
I wondered if you ever fixed the suspension issue. I can see that job being more difficult with cold fingers.
Good luck with the laptop. As you previously mentioned, I would have trouble just getting the keyboard off. I've replaced several LCDs and plenty of hard drives and lots of RAM, but never a motherboard in a laptop. One of my very best machines was a desktop that I built several years ago for producing A/V. I bought a pile of components and put it all together. Amazingly, it worked.
Good luck with the laptop. As you previously mentioned, I would have trouble just getting the keyboard off. I've replaced several LCDs and plenty of hard drives and lots of RAM, but never a motherboard in a laptop. One of my very best machines was a desktop that I built several years ago for producing A/V. I bought a pile of components and put it all together. Amazingly, it worked.
#7708
11-08-2017, 02:27 AM
Join Date: Sep 2011
Location: Great Falls, Montana
Posts: 62,139
Received 3,991 Likes
on
1,598 Posts
They are sailors too.......
Good night....
Good night....