I have a 1986 Ford Bronco II the wiring to the brakes got a short and melted the wires in the middle ( by middle I mean underneath the bronco like right under the drivers seat to the back seat). I cut the melted part out and then noticed 18 wires from the front 15 wires in the back.
The wires melted going towards the brake, tail lights I had to cut them like a foot part.
Problem is that there are 18 wires in the front and 15 wires in the back. The wire colors
are
FRONT: 2- black, 3- orange with blue stripe, 3- green with orange stripe, Yellow, red
with white stripe, peach with black stripe, black with brown stripe, blue with orange
stripe, 4-brown and a white.
BACK: 2-black, 3- orange with blue stripe, 3- green with orange stripe, yellow, red with
white stripe, peach with black stripe,black with brown stripe, blue with orange stripe, 2-
brown.
There is the problem 4 brown to 2 brown and 1 white wire I am lost don't have a clue to
how to connect. I assume that the other multiple wires hook individual to each other.
HELP PLEASE