cts insight with gauges
Thread Starter
|
New User
Joined: Sep 2012
Posts: 12
Likes: 0
cts insight with gauges
Hello everyone I know there are all kinds of post about gauges but I'm having trouble deciding what 3 mechanical gauges to get to go with a cts insight for my 2004 6.0 any information would be greatly appreciated again sorry for making another post about gauges
Tuned
Joined: Feb 2014
Posts: 292
Likes: 2
From: Southern Maine
trying to upload a picture but its not working...
I have a three gauge pillar with the CTS on the bottom hole, a 0-60psi boost gauge in the middle, and a trans temp up top. I also have a EGT probe add on to my CTS so i can monitor that too.
I wanna lose the trans temp and put fuel pressure in at some point. The trans never really leaves 160. It went about 5 degrees above it towing a 24 foot boat last weekend.
I have a three gauge pillar with the CTS on the bottom hole, a 0-60psi boost gauge in the middle, and a trans temp up top. I also have a EGT probe add on to my CTS so i can monitor that too.
I wanna lose the trans temp and put fuel pressure in at some point. The trans never really leaves 160. It went about 5 degrees above it towing a 24 foot boat last weekend.
Tuned
Joined: Feb 2014
Posts: 292
Likes: 2
From: Southern Maine
Laughing Gas
Joined: Oct 2012
Posts: 1,202
Likes: 1
From: Frederick MD
If you keep your cts updated it will pretty much monitor anything you want. I Usally keep mine on the 8 gauge screen. Where I am set at ect,eot,egt,tft,ficm power, battery power, boost. And then one flavor of the day.
Thread
Thread Starter
Forum
Replies
Last Post
