Mass air conversion help
#1
Mass air conversion help
I recently built a motor for my 89 f150 and from what I'm told the speed density set up may not work well with my cam, well I intended to switch to mass air anyway so that's fine! But iv done tons of reading on it and found some good info but not all what I needed. My question is what all I gonna need? What vehicles cam I ****** the parts from? Ect ect.. My truck has the 5.0 and the aod tranny. It would be great if Some one out there had some step by step info! Thanks
Thread
Thread Starter
Forum
Replies
Last Post
richard_d
1987 - 1996 F150 & Larger F-Series Trucks
16
02-07-2002 08:55 PM