Best stock heads for a 351W?
#16
Matt, my dad runs 1969 302 heads on his 1975 351W we currently run in our truck. the heads were milled for 9.5:1 compression on dished pistons with 2.02/1.6 triple ground valves, hardened valve seats and a 3 angle valve job with full porting on both sides. The head bolt holes in the heads needed to be drilled to 1/2". It is not difficult to do.
They run very well.
GT40 and GT40P heads are also excellent but the P heads have a revised spark plug angle which you need to buy specific headers for.
They run very well.
GT40 and GT40P heads are also excellent but the P heads have a revised spark plug angle which you need to buy specific headers for.
Thread
Thread Starter
Forum
Replies
Last Post
lil'ford
Small Block V8 (221, 260, 289, 5.0/302, 5.8/351W)
23
12-02-2014 06:29 PM
darthice
Small Block V8 (221, 260, 289, 5.0/302, 5.8/351W)
12
07-07-2010 08:44 AM
4x4akvan
Small Block V8 (221, 260, 289, 5.0/302, 5.8/351W)
4
01-14-2003 04:03 PM
wisnowman
Small Block V8 (221, 260, 289, 5.0/302, 5.8/351W)
3
10-28-2001 05:52 PM