I’m pretty sure he meant the big boobies in a stripped shirt.

 

I wonder if She....and the truck are still around.

 

For those that didn't get a chance to see the truck and their coverage of the May Super Nationals on Dream Rides, Masters Entertainment Group just posted the show on You-Tube.

 

Right on Randle! That’s awesome. Super proud of you and looking at your truck never gets old..

 

What he said ^^^

 

Awesome Randle!! Nice work!!

 

Does anyone know what Wilwood Manual Proportioning Valve Randal used, there are (3) selections;
1) 260-10922 Proportioning Valve, **** Style, 3/8-24 seats
2) 260-12627 Proportioning Valve, **** Style, 10mm x 1.00 seats
3) 260-8419 The lever “clicks” into the six positions for positive adjustment. Valves weigh only 6.1 ounces
(lever), and have two .25” side mounting holes spaced 1.00” apart. Inlet / outlet ports are 1/8-27 NPT
and valves are supplied with two 1/8-27 NPT to 3/-24 inverted flare female fittings that will fit most
domestic 3/16th hard brake lines
When I spoke with the Wilwood Tech, he seemed to think 260-10922, would be the most likely to work.

Any help appreciated !!!

Thanks !!! Michael

 

I think what matters more is which flaring tool(s) YOU have. The 260-10922 requires you to flare the tubing the standard inverted flare after you slide their fitting on . Where as the 260-12627 requires you to flare the tubing Bubble flare. That is the only difference between those two that I know of. IMHO I wouldn't get number 3. It only gives you 6 choices of adjustment.

 

@JEFFFAFA,

Many Thanks for the quick response, will I have to remove the stock drum brake "proportioning valve equivalent", or just leave in place ???

Thx !!!

Michael

 

PM sent to you.

 

Where the heck is Randle these days

 

Gerry, his kids are keeping him busy and he has a few projects he's working on. It's all good. He'll be back.

 

2X on the missing Randle, and thanks Gavin for the update...

Baja

 

Hey everybody,

So for those who don't know or know of me, I'm Randle's son, and I thought I would give you guys an update. We've been doing a bunch of work to the Model A and some touchup on the truck. We haven't been showing them like we had in years past, but we are still showing them. So far we have a few trophies, 1 best of show truck at a small show and both of us (I'm showing the truck while he shows the Model A) took top 25 points at a national show with between 350-450 vehicles. We are going to be at another show this weekend about 3 minutes from our house that always has a ton of cars. I'll share some pics soon of our handy work. Also, Gavin, sorry I missed you while you were at dad's. I meant to step down and introduce myself, just didn't get the chance. I did hear that you guys enjoyed riding around in the Model A .

Have fun guys... I'll post those pics soon.

 

Hey Jacob, thx for the update