How to remove a drop in liner
#1
How to remove a drop in liner
I have a '92 f150 long bed. It had a Ford factory drop in liner when I bought it. It also has a GemTop cap. There is a small water drip at each front corner after I wash the truck but I couldn't see any after yesterday's rain. I don't know if water has gotten in over the years.
After reading several threads on this forum about rust forming under drop in beds, I thought I should have a look under the liner and check for rust.
My question is how to remove the liner to do this. The liner looks like it is held in at the end of the sides next to the tailgate. I'm reluctant to pry on this old liner. Also I don't know if the Cap has to come off as well. What I'd like to do is slide the liner back far enough to check for rust at the front of the bed.
Any suggestions would be appreciated.
After reading several threads on this forum about rust forming under drop in beds, I thought I should have a look under the liner and check for rust.
My question is how to remove the liner to do this. The liner looks like it is held in at the end of the sides next to the tailgate. I'm reluctant to pry on this old liner. Also I don't know if the Cap has to come off as well. What I'd like to do is slide the liner back far enough to check for rust at the front of the bed.
Any suggestions would be appreciated.
Thread
Thread Starter
Forum
Replies
Last Post
nstueve
1987 - 1996 F150 & Larger F-Series Trucks
28
04-07-2010 02:30 PM
resim67
Bed Covers, Tonneau covers, Toppers/Canopies & Bed liners
3
03-05-2008 09:40 AM
skilife17
Bed Covers, Tonneau covers, Toppers/Canopies & Bed liners
4
12-22-2007 02:09 PM