Parts information for a 1955 ford f-350
#16
The wheels supplied on 1955 DRW F-350s are not widow makers. They are Budd #65340 which are 16" x 5.5" having the Firestone "RHP" side ring/lock ring design. Should be good to use if not damaged, rusted, etc. As said, they are all dangerous if not handled with care, aired in a cage, etc. Below is the "RHP" cross section diagram.
If you are able to find a set, tubeless 17.5" x 5.25" wheels were first offered as an option in 1956. They are Budd #71320 having six hand holes. A three hand hole version, #79120, was later substituted. Stu
If you are able to find a set, tubeless 17.5" x 5.25" wheels were first offered as an option in 1956. They are Budd #71320 having six hand holes. A three hand hole version, #79120, was later substituted. Stu
Thread
Thread Starter
Forum
Replies
Last Post
TheDrivenMan
1948 - 1956 F1, F100 & Larger F-Series Trucks
18
10-17-2011 05:51 PM
Pinecrestwoods
1973 - 1979 F-100 & Larger F-Series Trucks
17
08-29-2009 03:51 PM
dcammuso
1948 - 1956 F1, F100 & Larger F-Series Trucks
1
02-13-2008 11:56 AM