Category: Accessories
Price: $0
Private or Vendor Listing: Private Listing
Part fits (you may select multiples): S2000
Item Condition: MD
Shipping Information: Item can be shipped
Engine: Part suitable for gas truck, Part suitable for diesel truck

I have a 97 F350 Crew cab long bed 4x4 that I am parting out. The front axle will be going under my F250 but the rest of the truck is for sale. It has a 460 motor with about 260k on it but it seems to start and drive just fine. The trans is a jasper e4od but I am not sure of the mileage. The fluid is bright red and it seems to work fine. I have not personally driven the truck fast enough for it to shift, but it was taken off the road about a month ago due to a blown brake line. The transfer case is a Borg Warner 4407 but I will need the yoke for the front drive shaft. I may just swap the case or replace the yoke with the one from my 250.

Engine - $250 (for an extra $100 I'll include the computer and harness)
Trans - $350
T-case - $250
XLT Tailgate - $50
Doors - $25ea
Seats - $20ea
Cowl - $20
Metal Body piece under Grille - $20
Plastic Header Panel - $20

Feel free to make an offer. If you see anything else you need please let me know.

 

If the cab comes off im interested in the cab cross member

 

Where are you located and what would kinda price on all of its tailgate hardware including the inner cover plate? (Everything but the tailgate itself)

Feel free to PM me.

 

The truck is in Great Mills, MD.

 

I will look into the tailgate hardware this weekend and respond to your pm.

 

Dan1, you have a PM.
Fordka, ill let you know when the cab comes off.

 

Bump

XLT Tailgate - $50
Doors - $25ea
Seats - $20ea

 

how is the back drivers door is rusted or dented in anyway and i might be interested in some other parts also thank you very much

 

Well, I tried to get a picture of the bottom side but that door does not open. I pulled the door panel but i still could not get it to open.
The door has some rust on the bottom and a small dent. If you are still interested I will mess with it some more.

 

how much for the cab

 

If you want the cab its yours for $150, maybe cheaper if you help pull it. Its basically scrap, the floor is rusted out and it has been patched with a tow away zone sign on the driver's side.

 

thank you for looking but its about what i have trying to find alittle better and agin thank you

 

Can't tell in the picture-does it have the gauge cluster with a tach?

 

It does not have a tach. Also to answer your PM, the drivers door panel has been drawn on with a black sharpie and the soft arm rest on both of them is cracked.

 

Thank you!