ok ive been searching around here and could not come up with a definitive answer..
im going to start a build on a 52 f3 to f1 clone this summer..
im planning on running a jag ifs ..and a explorer 8.8.. im curious about bolt pattern on the jag ifs.. most of the info I found is saying the jag ifs is
5x4 3/4 is this correct or are they 5x4 1/2 same as explorer rear... Thanks for any input on this matter

 

jag IFS that is commonly used is GM pattern 5 x 4 3/4" with 1/2" studs. I will be running adapters to use my Ford wheels.

 

5 on 4.75 (actually, since it's metric, 5 on 4.73, but who's counting) on the jag, 5 on 4 1/2 for the 8.8. I'm using adapters for the 8.8 to match the jag, but I don't need to. I have dual pattern wheels.

 

I used a 4x4 s10 rear end to match bolt pattern with my jag ifs install on 48 f1.