When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Buckstop front bumper installed with Warn PowerPlant 12,000lb winch and 2005 style headlights/grille
My Buckstop bumpers were delivered two days ago. Yesterday were prep and paint. Today was install. The bumper is amazing. Super well built. I haven't put the rear on yet but that one is pretty simple. The front was a little more complex.
Also went ahead and installed the newer style grille and headlights to freshen up the front end. I went with Harley lights.
That looks amazing, plus the fog lights look like they will light up the night. Do you know how much heavier your new set up is vs the stock bumper?
I don't. Front and rear bumpers are 405lbs shipping weight. Take out 50lbs or so for the pallet. The rear bumper by my guess is about 100lbs. That leaves about 250lbs for front bumper, plus a 115lb winch.
Stock front stuff probably weighs a good 150lbs all together. The bottom blocker beam is about 50lbs and the bumper itself isn't all that light.
So, by my very rough estimates, about 220lbs over stock with winch?
I don't. Front and rear bumpers are 405lbs shipping weight. Take out 50lbs or so for the pallet. The rear bumper by my guess is about 100lbs. That leaves about 250lbs for front bumper, plus a 115lb winch.
Stock front stuff probably weighs a good 150lbs all together. The bottom blocker beam is about 50lbs and the bumper itself isn't all that light.
So, by my very rough estimates, about 220lbs over stock with winch?