looking for owners of 04 or newer dually pickup owners to answer a question for me.

does your truck have 8X200mm, or 8X170mm wheels?

 

I believe what you are after is on page 87 of the link:

https://www.fleet.ford.com/truckbbas...Pickups_SB.pdf

This is what I have:

Forged Polished Aluminum (F-350/F-450 DRW) 17" x 6.5" J 142 (5.55) 8 200 (7.87) 3195

 

thanks Scott.
i was actually hoping to hear from someone with a 2004 or even a 2005 that could confirm the dually pickup had 8X200.
i want to convert my 04 F-350 SRW to a dually and need to know what rear to get.
and i would rather keep a small tire, i am not a fan of large "bling tires" 16's are more than big enough for me, and i have 6 sets already to choose from to put on the dually rims.

 

bump to top of page

 

Well I can't answer your original question, but if you want to keep your 16s you'll need an 04 or older axle. They went to the larger wheels in 05 because they have larger brakes and the 16s won't fit.

Sent from my HTC ONE using IB AutoGroup

 

bump to top.

 

They went to the larger wheels in 05 because they have larger brakes and the 16s won't fit.

 

rite. i know they went to a 17 inch wheel in 05 with the larger brakes. but that does not answer my question.

i want to know if the 2004-2005 or even 2006 dually pickup came in 8X200mm bolt pattern, or if it was cab chassis only for the early years.
i know 2010 dually's were 8X200mm.
the front 8X170mm to 8X200mm adapters i have are 2004 date code, for a 2004 F-350 dual wheel 4X4.
but i do not know if it is cab chassis only, or dually pickup also

 

My 2005 dually is 8x200.

I measured.....

 

thanks. this confirms that i can use a 2005 dually pickup rear.