Couple pics of the Scangauge mount I made
#1
#3
James
#5
Oh you won't be stealing it from me... before all the rechargeable flashlights and their cradles became popular, Maglites were screwed down to the floors of many police cars.
I just got used to it being "right there" to grab on my way out of the car.
James
I just got used to it being "right there" to grab on my way out of the car.
James
Last edited by DSN46; 10-22-2013 at 05:13 PM. Reason: missed a word
#7
Trending Topics
#8
One thing I should mention to you and Crunk (and anyone else who wants to mount a light like that)...
The floorboard is not level at that point next to the seat. There are "curves" that have to be mitigated. I used washers under the mounts with longer bolts to "level" them out with each other. If you don't do this, the light will be at an angle just enough that you will crack the mounts after putting the light in and out several times. Ask how I know....
Good luck!
James
The floorboard is not level at that point next to the seat. There are "curves" that have to be mitigated. I used washers under the mounts with longer bolts to "level" them out with each other. If you don't do this, the light will be at an angle just enough that you will crack the mounts after putting the light in and out several times. Ask how I know....
Good luck!
James
Thread
Thread Starter
Forum
Replies
Last Post
denverslim
1948 - 1956 F1, F100 & Larger F-Series Trucks
10
03-26-2009 08:34 AM