Drum Brake Line Ideas
#1
Drum Brake Line Ideas
I have a 1962 F100 Flareside with drum brakes all around
So I recently replaced my master cylinder and 2 wheel cylinders. Thinking that was the end of my problems I put all the lines back together.. Soon all hell broke loose. Long story short I've had to cut out all my steel lines and Im going replace them all but I'm having trouble locating a similar "brake line distribution block" the little brass piece that has 3 outlets and 1 inlet that comes directly from the M. Cylinder.
My current idea is to run 3 brake line tees in substitution.
Here's my diagram
Logically this works but maybe there's something I'm forgetting.
Please feel free to share your input.
So I recently replaced my master cylinder and 2 wheel cylinders. Thinking that was the end of my problems I put all the lines back together.. Soon all hell broke loose. Long story short I've had to cut out all my steel lines and Im going replace them all but I'm having trouble locating a similar "brake line distribution block" the little brass piece that has 3 outlets and 1 inlet that comes directly from the M. Cylinder.
My current idea is to run 3 brake line tees in substitution.
Here's my diagram
Logically this works but maybe there's something I'm forgetting.
Please feel free to share your input.
#4
Thread
Thread Starter
Forum
Replies
Last Post
Tbb_'62 F100
1961 - 1966 F-100 & Larger F-Series Trucks
6
04-28-2019 12:33 PM
Dchapa10
1961 - 1966 F-100 & Larger F-Series Trucks
2
11-04-2014 12:25 PM
dieselzen
Brakes, Steering, Suspension, Tires, & Wheels
9
10-04-2011 08:53 PM