'42 Truck
#1
06-30-2013, 01:08 AM
Join Date: Jul 2009
Location: Brisbane, Australia.
Posts: 197
Likes: 0
Received 0 Likes
on
0 Posts
'42 Truck
G'day everyone, what have I been up to ? Well , renewed interest in CB radio, but now I'm back on track. I bought a new carb, the original
throttle pedal was in a bad position, so I changed to a cable operated throttle assembly sourced from a '99 Falcon. I made a spacer to go between
the carb and manifold using a modern plastic similar to Bakelite. The aircleaner is off a 1970s Falcon.
Here's a few photos.
Cheers Steve.
throttle pedal was in a bad position, so I changed to a cable operated throttle assembly sourced from a '99 Falcon. I made a spacer to go between
the carb and manifold using a modern plastic similar to Bakelite. The aircleaner is off a 1970s Falcon.
Here's a few photos.
Cheers Steve.
#2
06-30-2013, 01:18 AM
Join Date: Jul 2009
Location: Brisbane, Australia.
Posts: 197
Likes: 0
Received 0 Likes
on
0 Posts
#3
06-30-2013, 01:34 AM
Join Date: Jul 2009
Location: Brisbane, Australia.
Posts: 197
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post