I have 05 f250 5.4, it was driven pretty hard over the years with plowing and hauling. The cam phasers started giving me problems at about 125k, I decided to just replace the motor after a while, I didn't want to keep throwing parts and a couple grand at it with that many miles, Any way the problem I'm having is its still throwing codes with the new motor and new cam sensors, it runs ok it still feels like it has a little shake to it at idle, any help on what to look for would be greatly appreciated, it's throwing bank 1 cam sensor circuit malfunction

 

That would imply and electrical problem. Could be a bad connection, pinched harness or a faulty new phaser.