Finally back to working on my 53 F100!
I am looking for anyone who has used the Heidt SuperRide IFS with a small block Ford V8. I would like to get a picture of how you placed your motor mounts with the Heidt IFS unit.
Any help would be greatly appreciated.
Jim

 

Try this post.

https://www.ford-trucks.com/forums/1...uspension.html

 

Jim,

This was also posted yesterday.

https://www.ford-trucks.com/forums/1...ng-ii-ifs.html

BJ

 

Thanks for setting me up on the previous post - great pictures and it confirms what we were planning.
We have had the winter from hell in Saskatchewan and the only good thing is that I have a lot of nights to work on my wife's 53. Heidt unit and motor mounts will get welded in probably next weekend and then work starts on the engine/transmission installation. Picked up a great set of seats for the truck at the wrecker and we are sticking in new gages, full wiring kit, steering column and shifter setup for the C4. Goal is to have it on the road by our anniversary - June 7th.
Thanks again,
Jim

 

Good luck and keep us posted on your progress.