Category: Exterior - Body Parts
Price: $1
Private or Vendor Listing: Private Listing
Part fits (you may select multiples): CRX & pre '92 Civic
Item Condition: CA
Shipping Information: Item can be shipped
Engine: Part suitable for gas truck, Part suitable for diesel truck

I have the three speed column shift set up.

 

Good morning and thanks for the quick reply.

****
UPDATE - I just came in from cleaning out the bed of my truck and I found most all of the shift linkages from the truck.

I apologize for the false alarm but I would have sworn that the first time I looked in that box that nothing of "value" was in there.

****

Thanks!
Dave

 

Hello!!! I am new to the forum and you are the master... I just picked up a restorable 1950 F-1 and will need parts... The jury is out on some things but I definitely need a tailgate with ford script (3 raised panels). Is this something you have or should I just get a new one? I am also looking for rear fender passenger side. The others require hammer/dolly work. We will see how that goes. Any help and advice greatly appreciated...
Gary

 

I don't have any 48-50 tailgates left. I have one or two passenger side fenders, but they need rust repair.

 

Thanks, I will be in touch as I tear down the truck for restoration for other needs. The F1 is mostly complete so I am started with good bones.... The rear fender is almost whole, just that someone took a hammer to it and the work to straighten out at this point is insurmountable, but maybe not...
Gary

 

PanelMan, looking for a set of '52 hood spears. I have tracked down a set of the rounds for the F5, just need the spears that say FORD only on them.

 

Are your fenders rust free? If so how much?

 

PanelMan, I'm looking for one sacrificial running board to cut up to do patch panels in one of my running boards. I have a 49' F1. Do you have something that would possibly work for me? TIA!

 

51PanelMan,

I am looking for 1952 F-1 5-star windshield stainless trim.

Thanks, Walt

 

Just sent you email re: replacement wheels for my 17" widow makers, I am also looking for an air cleaner for my FH 6.
Thanks

 

Do you still have any F2/F3 running boards?

 

I have a 1950 F1, looking for the metal bed strips? I just have a piece of plywood in there now so I'm starting from scratch.

 

Hello,
Looking for a '48 - '52 front brake backing plate for a F6.
Same as (according to the book) models JH, T, TH, TL, W, WH.

 

Howdy montana,
I think I have a running board off a f5 that might work. I will check tomorrow and see if it is still in my pile o parts. I have an f1 we have been repairing and have a few pieces.

 

Do you have a 1951 truck Hood or do know where I can locate one.

Please call or Text
Cell 831 595 3240

Thanks