Does annyone have measurements for the 2 middle crossmembers for 1953 f100 bed. Mine were terrible, and the guy who sold me the car, threw them away...

 

If nobody has a loose one handy, I'll go outside and get some measurements afterwhile when it warms up a bit.

And welcome to the forum!

 

What measurements are you looking for exactly? The parts are asymmetrical and every side and angle is going to be different. It takes up the space where the frame humps up over the axle. They're as wide as the box is, about 49". Replacements are available from most every truck parts vendor out there, about $20 each.

 

I need the lenght, height, width. I know that the sides that come on the frame are on an angle. But the problem is, to order only those 2 parts, and ship it to Croatia, i will pay for each 100$. So any help would be appreciated.