new pad/disc help
Thread Starter
|
New User
Joined: Jan 2013
Posts: 2
Likes: 0
new pad/disc help
hello to all. this is my first post. looks like a great site i wish i had found this a long time ago. i need new front disc and pads for my
2004 fx4 supercrew. i am looking for some recommendations on what
to put on and where to buy from. i am not looking for something cheap,
but also i am not looking to spend a fortune. also pads that are not going to be squeaky. i like quite
.
thanks
2004 fx4 supercrew. i am looking for some recommendations on what
to put on and where to buy from. i am not looking for something cheap,
but also i am not looking to spend a fortune. also pads that are not going to be squeaky. i like quite
.thanks
Fleet Owner
Joined: Aug 2010
Posts: 21,253
Likes: 1,656
From: Reynoldsburg, Ohio
On at least two E250's typiclaly loaded to 7560# as a daily drivers I use nothing but Ford reman'd calipers and pads---cheap enough and great quality.
For rotors I'd call a local Advance Auto and see what they're offering as far as USA made parts, don't forget bearings and new seals too.
Throughout this thread there are many opinions forwarded about this topic and its all nothing less than interesting. You can maybe go back page-by-page and see if any topic heading jumps out at you.
HTH and best of luck!
For rotors I'd call a local Advance Auto and see what they're offering as far as USA made parts, don't forget bearings and new seals too.
Throughout this thread there are many opinions forwarded about this topic and its all nothing less than interesting. You can maybe go back page-by-page and see if any topic heading jumps out at you.
HTH and best of luck!
Thread
Thread Starter
Forum
Replies
Last Post
dyhrdford
1999 - 2016 Super Duty
1
Nov 25, 2010 07:57 PM
