Ok i got a factory aic that doesnt have the option to run anything but higher idle, has 6 wires and digital display. At my fire company when i ran there we had one but it also ran the pto. I had to get a replacement plug to plug into it since it didnt come with one when i got it. i would like to use it for when im using the jumper cables or my wheel lift. Ive tryed the ford dealer and they cant get me a cable or i would be able to hook up to stock locations. So if anyone could help it would be great. The replacement plug all wires are black so i cant go by O the blue with the pink tracer goes to this location. I just dont want to go on ebay and buy a complete kit when i have a working unit. So please please help me out

 

Know nothing about it but here is a bump.

 

I don't have a schematic of the AIC in my Ford wiring diagram, but here are photos of both ends of the cable that connects the AIC to the truck harness:

Under dash end (round black 4-pin plug):



AIC end (grey rectangular 6-pin plug):



Hope it helps,

Chris

 

You could look for these connectors in your local salvage yard. That's where I get all of my factory wire connectors when I'm repairing connectors or adding components to my truck.

Drake

 

Salvage yard is my suggestion too. Try and find one that deals in 3/4 ton and up trucks. All Ford ambulances starting in 1995 have them, the AIC module. That's where I got mine with the wiring.