South Texas Tech Day #1 for 2013!
#1
South Texas Tech Day #1 for 2013!
hi guys and gals...
a tech day is tentatively to happen right after the first.
its looking like the best locations to centralize this shin-dig will either be
Victoria, Tx
or
Yoakum, Tx
there is much more room at the farm in Yoakum but we will be on generator power.
we could potentially do a 2 day thing if anyone has major surgery to perform.
plenty of room for tents, 5th wheels, trucks, tools, ice chests, and beer. we have a shooting range area on site if anybody feels like wrenching on trucks doesnt quite release enough testosterone.
attending:
twg1966
Nicmike
christof13t
so far on the list we have
2 frx install
bellowed uppies
mini turbo refresh
power steering flush
dont be scuurd to add your name and what your bringing to work on to the list.
a tech day is tentatively to happen right after the first.
its looking like the best locations to centralize this shin-dig will either be
Victoria, Tx
or
Yoakum, Tx
there is much more room at the farm in Yoakum but we will be on generator power.
we could potentially do a 2 day thing if anyone has major surgery to perform.
plenty of room for tents, 5th wheels, trucks, tools, ice chests, and beer. we have a shooting range area on site if anybody feels like wrenching on trucks doesnt quite release enough testosterone.
attending:
twg1966
Nicmike
christof13t
so far on the list we have
2 frx install
bellowed uppies
mini turbo refresh
power steering flush
dont be scuurd to add your name and what your bringing to work on to the list.
#3
#5
I have FRx, turbo rebuild, non-EBPV pedestal and exhaust housing install, up-pipe donuts, new HPO lines, fuel bowl rebuild, HPOP o-rings, new fuel lines on both sides and maybe a new 4 inch exhaust system on the table. I have plenty of guns, too. However, I spent all my money on parts, so ammo is in short supply.
Also, I have mucho tools. Anybody needs to do ball joints, axle seals, rebuild a xfer case, rebuild a 10.25 or 10.5 rear end, rebuild a Dana 50, 60 or 110, test vacuum on anything, or check for blow-by (the right way)....I have all the special tools to do so, and can bring them on request.
I have a 7500k generator I can bring if necessary, Chris.
Also, I have mucho tools. Anybody needs to do ball joints, axle seals, rebuild a xfer case, rebuild a 10.25 or 10.5 rear end, rebuild a Dana 50, 60 or 110, test vacuum on anything, or check for blow-by (the right way)....I have all the special tools to do so, and can bring them on request.
I have a 7500k generator I can bring if necessary, Chris.
#6
#7
I wish I had a couple extra days off for the drive to and from, it would give the opportunity for someone to really scrutinize everything on the new truck, and get the hutch, harpoon, and oil cooler seals fixed. Then spend the rest of the weekend as a tool pusher and just watch the magic happen.
Trending Topics
#8
#9
sweet. the rear plug on ted's truck was giving us fits. the craftsman universal dogbone i picked up fits like a custom glove but cant get it in there with turbo still on the motor.
wasnt to worried about accessibility on tech day because the plan was to be pulling the 2 that needed frx down to bare valley anyway f or turbo refreshes, up pipe work, fuel bowls and at least 1 hpop. would be cool to have another option available to remove the plugs with the turbo still on if need be.
#15